STYROKON Sp. z oo is located at 42 - 230 Koniecpol at Słowackiego 54. The company was established in 2007.10.01 with the separation of the EPS production department from Elektromechanika. However, the beginnings of production and experience of the crew goes back to 2000.

Our styrofoam is produced from reputable foreign raw materials

Styrokon is a member of PSPS (Polskie Stowarzyszenie Producentów Styrofianu) and, participates in the PSPS program, "QUALITY OF STYROPIAN."

The styrofoam produced meets the requirements of Polish and EU directives.

The location in the central part of Poland gives us the opportunity to quickly execute orders throughout the country and beyond its borders min.Czechy, Slovakia, Austria

The company in its history can boast of the titles and prizes awarded for its achievements and products, including:

• Craftsman of the Year 1999 - title for Mr. Stanisław Bieńkowski
• Medal of the European Union 2004 - for STYROKON products
• Polish Success of the Year 2004
• Eagle of Polish Business 2005

Business Gazelles 2013

EPS 044 WALL heat insulation of diaphragm walls with ventilated and non-ventilated air gap expansion joint insulation thermal insulation in internal partition walls thermal insulation of roofs from the bottom with lining thermal insulation of floors between joists thermal insulation in light structural roofs with cladding thermal insulation between rafters (attic) thermal insulation of walls by the method (light - wet) ETICS, BSO or (light - dry) - if in accordance with the requirements of the system.

EPS 042 FASADA thermal insulation of diaphragm walls with ventilated and non-ventilated air gap expansion joint insulation thermal insulation of walls in frame construction with lining thermal insulation of ceilings with lining thermal insulation of floors between joists thermal insulation in light structural roofs with lining thermal insulation between rafters (attic ) thermal insulation in ventilated flat roofs Thermal insulation of walls by the method (light - wet) ETICS, BSO or (light - dry) - if in accordance with the requirements of the system.

EPS 040 FASADA thermal insulation of walls with elements with cladding and ventilated air gap thermal insulation of walls in external composite insulation systems thermal insulation of rims as shuttering for plastering thermal insulation of lintels and reveals thermal insulation in prefabricated sandwich panels external thermal insulation of ceilings from underneath in complex external insulation systems thermal insulation and lost formwork of reinforced concrete ceilings thermal insulation of walls by the method (light - wet) ETICS, BSO or (light - dry)

EPS 040 EKO FASADA thermal insulation of walls with elements with cladding and ventilated air gap, thermal insulation of walls in external composite insulation systems, thermal insulation in prefabricated external sandwich panels, insulation of ceilings from the bottom in complex external insulation systems, thermal insulation for the supporting structure, insulation thermal walls including ETICS, BSO (light-wet) or (light-wet)

EPS-039 - ROOF / FLOOR heat insulation in prefabricated sandwich panels external thermal insulation of ceilings from the bottom in complex external thermal insulation systems heat insulation and formwork lost reinforced concrete ceilings thermal insulation of walls below the ground with anti-water insulation poorly loaded thermal insulation walls including BSO, ETICS (light - wet) or (light - dry) thermal insulation of rims as shuttering for plastering thermal insulation of floors in residential construction with a functional load of up to 2 tons / m2

EPS-040 - EKO DACH / FLOOR thermal insulation in prefabricated sandwich panels external thermal insulation of ceilings from the bottom in complex external thermal insulation systems thermal insulation and formwork lost reinforced concrete ceilings thermal insulation under the supporting structure thermal insulation of walls below the ground with anti-water insulation poorly loaded thermal insulation floors under the undercoat poorly loaded thermal insulation of floors on the ground with undercoat poorly loaded

EPS 038 -DACH / FLOOR thermal insulation of walls with elements with cladding and ventilated air gap thermal insulation of walls in external composite thermal insulation systems thermal insulation of rims as shuttering for plastering thermal insulation in prefabricated sandwich panels external wall and roof panels with metal claddings and roofing paper thermal insulation of ceilings from below in combined external thermal insulation systems thermal insulation and formwork lost of reinforced concrete ceilings thermal insulation under load-bearing structure thermal insulation of walls below the ground with waterproofing normally loaded thermal insulation floors under flooring underlay Normally loaded thermal insulation of floors on the ground with floor underlay normally thermal insulation of walls using a method including BSO, ETICS (light - wet) or (light - dry) thermal insulation of floors in residential construction with a payload of up to 2.4 tons / m2

EPS 037 DACH / FLOOR thermal insulation of plinths in external composite thermal insulation systems thermal insulation of walls below the ground with waterproofing normally loaded wall and roof panels with metal claddings and roofing felt thermal insulation floors under underlay prefabricated slabs thermal insulation floors under flooring underlay normally laden thermal insulation of floors on the ground with a flooring primer Normally loaded thermal insulation of flat roofs, without access to thermal insulation of floors in residential construction with a functional load of up to 3 tons / m2

EPS 036 PARKING thermal insulation of plinths in external composite thermal insulation systems thermal insulation of walls below the ground with waterproofing highly loaded thermal insulation floors under undercoat heavily loaded thermal insulation floors on the ground with undercoat heavily loaded thermal insulation of the supporting structure for covering with tiles construction of embankments road, rail bridgeheads, bridges and other engineering structures insulating layer against freezing in road constructions heat insulation of floors in industrial construction with a functional load of up to 4.5 tons / m2

EPS 032 NEOSTYR FACADE thermal insulation of walls with elements with cladding and ventilated air gap thermal insulation of rims as shuttering for plastering thermal insulation of lintels and reveals thermal insulation in prefabricated sandwich panels external thermal insulation of ceilings from the bottom in complex external insulation systems thermal insulation under supporting structure thermal insulation of walls by a method including BSO, ETICS (light - wet) or (light - dry) thermal insulation of three-layer walls thermal insulation of partition walls thermal insulation of rafters roofs thermal insulation of floors on joists thermal insulation in ventilated flat roofs

EPS P 120 GEOSTYR thermal insulation of plinths in external composite thermal insulation systems thermal insulation of walls below the ground with waterproofing normally loaded thermal insulation floors under floor underlay highly loaded thermal insulation floors on the ground with undercoat heavily loaded insulation layer against freezing in road constructions thermal insulation floors under a flooring primer Normally loaded thermal insulation of floors on the ground with a flooring underlay Normally loaded thermal insulation of flat roofs, without access to thermal insulation of floors in residential construction with a payload of up to 3.6 tonnes / m2

In our offer for individual orders

styropapą

STYROPAN KEY

GRANULAT