Is a producer:

1. Bearing alloys:

• tin (Ł83, Ł89, Ł89L, V738, Ł80S)
• lead (Ł6, Ł16, Ł10As)

in the form of cast and cast rods

2. Lead-free compounds (SnCu; SnAg; SnAgCu; SnZn)

in the form of bars, casting bars, extruded bars, solid wires or wires with a flux with a diameter of 0.5mm-12.0mm and on reels of 100g, 250g, 1kg, 2kg, 10kg, 20kg.

3. Lead-tin powder (SnPb) - LC1S1, LC20A2, LC30, LC40A1, LC50, LC60, LC63, LC90

in the form of bars, casting bars, extruded bars, solid wires or wires with a flux with a diameter of 0.5mm-12.0mm and on reels of 100g, 250g, 1kg, 2kg, 10kg, 20kg.

4. Low-melting alloys:

Stop Wood - TBC12, Stop without cadmium -TBC14 in the form of bars and cast bars

5. PbSb lead-antimony printing alloys.

6. Alloys for electroplating in the form of anodes, hemispheres - 50g.

7. Special alloys: SnNi, SnP, SnBi, SnIn, InGa, SnAs, PbAg in the form of bars and casting rods

8. Brazing water for soldering: steel, galvanized steel, TiZn, copper, bronze, brass:

• capacity bottles - 250ml; 500ml
• capacity canisters - 5l., 30l.

Its offer includes:

• Raw materials (tin, lead, antimony, bismuth)
• Anodes: Ni, Zn, Sn, SnPb
• Lead plates - Pb

It provides professional and comprehensive service, supported by many years of commercial experience combined with professional technical knowledge. The confirmation of the high quality of the products offered are the certificates issued by accredited research institutions, confirming the compliance of products with Polish or European standards.